DIN Standard 316L Stainless Steel Press Fittings Reducing Tee

Short Description:

1. High corrosion resistance and strength
2. Reliable and durable
3. Llong-life service
4. Safety and health to human,eco-friendly
5. Extreme simplicity and quickness of installation

 

Product Detail

Product Tags

1. High corrosion resistance and strength
2. Reliable and durable
3. Llong-life service
4. Safety and health to human,eco-friendly
5. Extreme simplicity and quickness of installation

 

Products name DIN Standard 316L Stainless Steel Press Fittings Reducing Tee
Steel Grade: 300 series
Size: 15-108mm
Type: Equal tee, reducing tee, female tee etc.
Max working pressure: 1.6MPa (equal to 232 psi)
Testing water pressure: 2.5MPa for JIS sizes (equal to 362.5psi), and 5MPa for EN10312 sizes.
Working temperature -20 to 110 degree centigrade (with Chlorinated butyl rubber O ring),
Suit medium: Cold water, hot water, compressed air, gas, oil etc
Price Term: FOB, CIF, CFR or as your requirement
Payment: T/T 30% in advance, the balance before shipment
Delivery: About 15 days after receiving the deposit
Packing: Wooden case water-proof package or as your requirement for stainless steel tee packing

 

Product Parameters

MATERIAL C Si Mn P S Ni Cr others
304/1.4301 ≤0.08 ≤1.00 ≤2.00 ≤0.045 ≤0.03 8.00-10.50 18.00-20.00
304L/1.4306 ≤0.03 ≤1.00 ≤2.00 ≤0.045 ≤0.03 8.00-12.00 18.00-20.00
316/1.4401 ≤0.08 ≤1.00 ≤2.00 ≤0.045 ≤0.03 10.00-14.00 16.00-18.00
316L/1.4404 ≤0.03 ≤1.00 ≤2.00 ≤0.045 ≤0.03 10.00-14.00 16.00-18.00
201(≥1.0%Ni) ≤0.12 ≤1.00 8.5-10.0 ≤0.06 ≤0.03 ≥1.00 14.00-16.00
201(<1.0% Ni) ≤0.15 ≤1.00 8.5-10.0 ≤0.06 ≤0.03 <1.00 14.00-16.00
430/1.4016 ≤0.12 ≤1.00 ≤1.00 ≤0.040 ≤0.03 ≤0.75 16.00-18.00
409 ≤0.08 ≤1.00 ≤1.00 ≤0.040 ≤0.03 ≤0.50 10.50-11.75
409L ≤0.03 ≤1.00 ≤1.00 ≤0.040 ≤0.03 ≤0.50 10.50-11.75
410/1.4006 ≤0.15 ≤1.00 ≤1.00 ≤0.040 ≤0.03 ≤0.50 12.00-14.00

 

Specification

Tee with female threadead
Dimensions L L1 Z Z1 S
15 x 1/2″ x 15 82 34 19 19 26
18 x 1/2″ x 18 82 37 19 22 26
18 x 3/4″ x 18 82 39 19 23 30
22 x 1/2″ x 22 88 39 21 24 26
22 x 3/4″ x 22 88 40 21 24 30
28 x 1/2″ x 28 96 41 24 26 26
28 x 3/4″ x 28 96 43 24 27 30
28 x 1″ x 28 88 47 24 28 38
35 x 1/2″ x 35 110 44 27 29 26
35 x 3/4″ x 35 110 46 27 28 30
35 x 1 1/4″ x 35 110 54 27 33 47
42 x 1/2″ x 42 134 48 31 33 26
42 x 3/4″ x 42 134 50 31 34 30
42 x 1 1/2″ x 42 134 59 31 38 55
54 x 1/2″ x 54 154 54 36 39 26
54 x 3/4″ x 54 154 56 36 40 30
54 x 2″ x 54 154 70 36 44 70

 

Equal Tee
Dimensions L Z L1 Z1
15 82 19 36 14
18 82 19 39 17
22 88 21 42 19
28 96 24 46 22
35 110 27 53 25
42 134 31 66 30
54 154 36 77 36

 

Reducing Tee
Dimensions L Z L1 Z1
18 x 15 x 18 82 19 39 17
22 x 15 x 22 88 21 41 19
22 x 18 x 22 88 21 41 19
28 x 15 x 28 96 24 54 32
28 x 18 x 28 96 24 54 32
28 x 22 x 28 96 24 44 21
35 x 15 x 35 108 27 57 35
35 x 18 x 35 108 27 57 35
35 x 22 x 35 108 27 48 25
35 x 28 x 35 108 27 49 25
42 x 22 x 42 134 30 51 28
42 x 28 x 42 134 30 52 28
42 x 35 x 42 134 30 55 28
54 x 22 x 54 154 36 57 34
54 x 28 x 54 154 36 58 34
54 x 35 x 54 154 36 61 34
54 x 42 x 54 154 36 73 36

Applications
School, residential area, hotel, shopping mall, pumping room, natural gas, solar energy, central air conditioning.

Why Choose Us?

1. Approved by ISO9001, CE, SGS every year

2. Best service within 24 hour`s reply

3. Flexible payment with T/T,L/C and etc

4. Smooth production ability (50000 PCS/month)

 

What Can We Serve For You?

1. Sample can be offered with free.

2. We have full stock,and can deliver within short time.Many styles for your choices.

3. OEM and ODM order are accepted, Any kind of logo printing or design are available.

4. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.

5. All of our products are produce by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.

 

Engineering Case
Singapore Financial Center,Liuzhou People’s Hospital,Crowne Plaza Poly Hotel,Shenzhen Songgang Middle School,Beijing Daxing Airport,

Installation

Step 1: Pipes are preferably cut perpendicularly to length with a pipe cutter or fine-tooth saw or a special electrical pipe saw.

Step 2: The pipes are then to be carefully deburred inside and out and, if necessary, calibrated.

Step 3: The press fittings should be inspected visually for integrity prior to processing. In addition, the O-ring must be checked for correct fit and integrity. No other lubricants such as oils or greases may be used and only original IBP sealing elements are to be used.

Step 4: Before assembly, the insertion depth of the fitting must be marked on the pipe (for the dimensions, see the table later). Thus, any shifts can be detected before pressing.

Step 5: The pipe is inserted into the fitting as far as the pipe stop in accordance with the previously applied insertion mark.

Step 6: Insert the appropriate size of press jaw in the crimping tool and position the jaw at right-angles on the fitting at the pressing location. The press cycle is started by starting the pressing machine and is completed when the jaws are fully closed. Caution! Secure pressings can be achieved only when the pressing jaws have moved completely together.

Our Company

Foshan Kuanyu Stainless Steel Co., Ltd, founded in 2011, is a modern enterprise, specializing in production and wholesale for all materials of stainless steel pipe for drinking water, stainless steel welded pipe, stainless steel pipe fittings and so on. Our products meet the the standard of ASTM, EN, JIS, DIN etc, and widely use in oil refinery industry, petrochemical, electricity, paper-making, wine and automobile industries, mechanical structure, construction, electronic biological technology, enviromental engineering and kitchen products. We have passed ISO9001 and ISO14001.

In order to producing the best products, we use the most advanced machinery equipment, innovative manufacturing technology, more competitive production line and also with the skilled staff, rich experience, to make “Kuanyu Stainless Steel Pipe” become the model of our industry.

Our Workshop

Our Business Partner

Packing
Wooden case with water-proof bag or as your requirement for stainless steel press tee packing.

FAQ

Q: What’s your MOQ(minimum order quantity)?
A: Usually our MOQ is 50 pcs, but we can accept less quantity for your trial order. Pls feel free to tell us how many piece you need.

Q: Are you manufacturer or trader?
A: We are the manufacturer.Our register factory is located in the main stainless steel production base of China-Foshan City which is near Guangzhou/Shenzhen port.

Q:How about your design ability? Do you offer OEM service?
A: we have our own design department, and have offer design service for thousands of cooperative partner. OEM accept and offer confidentiality agreement “business secret contract” for your design safe.

Q: What’s your payment terms?
A: 30% in advance by T/T ,70% will be before shipment or against the BL copy under FOB/CIF/CFR.

Q: How long is the production lead time time ?
A: It is 10-15 days generally and it can be negotiated based on your need and the quantity.

Send your message to us:

INQUIRY NOW
INQUIRY NOW